Condensate Pumping Packages

Condensate Return Pump Series CU

These units consist of a cast iron or epoxy coated steel receiver, one or two pumps, and automatic float control.  The pumps operate according to water level change in the receiver. Standard equipment is a heavy duty two-pole float switch on single units.  A mechanical alternator is provided on duplex condensate pumps. On single phase pumps through two horsepower, the switch is factory wired.  Steel Cover Plates, Duplex cover plates are split on 24” dia., 30” dia. and larger have individual pump mounting plates.  Receivers for condensate units are preselected for 1 minute net storage.

In the selection table, you’ll find that condensate pumps are pre-selected to deliver 1 gpm per 1000 EDR according to modern practice. This is twice the condensing rate and is the recommended rating.

ESP-Systemwize

Ready to select pumps as well as suction diffusers, triple duty valves, heat exchangers, air/dirt separators, PIC valves, and parts? Click below to open the new Bell & Gossett ESP-Systemwize selection tool and enter your duty points to begin selecting the most energy efficient system:

ESP-Systemwize

Sizing Tools:

Steam + Water Pressure Reducing Values

Software Tool and Application Support/Suggest Enhancements

Please click the button below to report issues and suggest enhancements.

Support Request

System Selection and Technical Product Support

Consult your local Bell & Gossett Representative for additional assistance.