Condensate Pumping Packages

Consolitrol NEMA 4 or 12 UL Control Panels

Domestic Pump Consolitrol NEMA 4 or 12 UL Control Panels for Simplex, Duplex, Triplex and Quadraplex Applications

Domestic® Pump and Hoffman Specialty® Consolitrol® Control Cabinets are available to comply with NEMA and JIC specifications. Panels may be factory mounted and wired or furnished for wall mounting

Description of Optional Panel Components:

  • Magnetic Starters must be used on all 3 phase motors and single phase motors 3 HP and larger
  • Disconnect Switches and Circuit Breakers – Either fuses or a circuit breaker is required ahead of the starters to protect against short circuits. A disconnect switch or circuit breaker also provides a means of shutting off power for service.
  • Selector Switches – “Auto-Off-Hand” selector switches provide a means of shutting off pumps and a means of testing in the “Hand” position. “Off-HandLead-Lag” selector switches may be furnished on duplex units with 2 float switches to provide manual alternation.
  • Electrical Alternator may be furnished on duplex units to provide automatic sequencing of lead pump. Use only when magnetic starters are provided. Use only with 2 float switches.
  • Transformer is required by the National Electrical Code to reduce control voltage when power supply exceeds 250 volts. A transformer is recommended when voltage exceeds 130 volts. Refer to local codes for requirements.
  • Pilot Lights – Pump running pilots are available to indicate pump operation.
  • Audible Alarm – An alarm to indicate low or high water level may be furnished. A separate tank mounted level switch should be provided with an alarm.

Specified Panel Components to be furnished with unit at extra cost.

Standard panels are supplied with NEMA 2 enclosures and are U.L. listed unless otherwise specified.
Maximum Temperature 140°F (60°C)

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • ESP-TANKS Expansion tank selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats
  • ESP-PICV is a quick and easy way to size and select Ultra Setter Pressure Independent Control Valves using just their flow rate. It eliminates the need to sort through technical documents or catalogs to size the right control valves for your job. Simply enter your required flow rate and ESP-PICV shows you all of the Ultra Setter valves that can meet that flow. You can also find CAD models and valve submittals, and once you've made all of your selections click "Send" and you can request pricing from your local rep.

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.