Potable Water Circulators

ecocirc® 19-16 – A Smart Circulator – Potable Water

Higher Efficiency & Improved Performance

Effortless “SMART” Circulator for heating cooling and potable water.

Onboard intelligence automatically adjusts speed to ensure maximized efficiency and accurate performance to suit a wide range of performance requirements.

The on board intelligence provides the motor with the precise frequency and voltage for optimum performance. The permanent magnets in the motor eliminate power wastage in magnetizing the rotor. The motor has superior starting torque and energy efficiency when compared with standard induction motor circulators.

True Variable speed – The pump speed is infinitely variable and is automatically adjusted by the controller to optimize performance and efficiency.

Sensorless operation – No external sensors are required.

Simplicity – The only moving part is the rotor/impeller unit. The shaft, shaft seals and conventional bearing bushings have been eliminated.

Pump and motor protection – The ecocirc 19-16 will protect itself against, motor over load, voltage issues and pump overload.

 

Smart CONTROL MODES

The ecocirc 19-16 has 3 smart operating modes:

Modes of Operation

  1. Proportional Pressure – Continuously adjusts the pump performance according to system demands. This mode of operation does not require external sensors and is recommended for systems with high pressure losses. The pump is configured to run in this mode at the factory.
  2. Constant Pressure – The pump maintains the selected differential pressure at any flow rate. This mode of operation does not require external sensors and is recommended for systems with relatively small pressure losses.
  3. Constant Speed – The pump maintains a fixed speed regardless of demand.

 

Auxiliary Functions

  1. Automatic Air Purge to remove any air trapped in the pump
  2. Standby use during long absences to minimize power consumption (<1w).

 

Features and Benefits (how can we sell operating modes)

Economical operation

  • Efficient ECM motor
  • Optimized hydraulics
  • Low operational costs

Chilled Water Applications

  • Electronics separated from the pump to prevent condensation
  • Worry free operation even at 14°F

User-Friendly Interface

  • Easy to set and operate

 

 

Brochures

Installation/Operation Manuals

Performance Curves

    Apologies, this section cannot be viewed in mobile

    ecocirc 19-16

    Loading products...

    Submittals

    ESP-Systemwize

    Ready to select pumps as well as suction diffusers, triple duty valves, heat exchangers, air/dirt separators, PIC valves, and parts? Click below to open the new Bell & Gossett ESP-Systemwize selection tool and enter your duty points to begin selecting the most energy efficient system:

    ESP-Systemwize

    Sizing Tools:

    Steam + Water Pressure Reducing Values

    Software Tool and Application Support/Suggest Enhancements

    Please click the button below to report issues and suggest enhancements.

    Support Request

    System Selection and Technical Product Support

    Consult your local Bell & Gossett Representative for additional assistance.