Y Strainers are designed for steam, oil or water lines. Strainers should be installed ahead of temperature regulating and/or pressure reducing valves and steam traps to protect their moving parts from dirt, this is particularly important for new installations.

 

Screwed NPT End

Model 415C

  • Cast iron body
  • Maximum pressure:
    • 250 psig (17.3 bar) for steam service
    • 400 psig (27.6 bar) for water service
  • Available in sizes 1⁄2″ – 3″ NPT

Model 420C

  • Cast brass body
  • Maximum pressure:
    • 300 psig (20.6 bar) for steam service
    • 400 psig (27.6 bar) for water service
  • Available in sizes 1⁄2″ – 3″ NPT

 

Flanged End

Model 450C

  • Cast iron body
  • Maximum pressure:
    • 125 psig (8.6 bar) for steam
    • 200 psig (13.8 bar) for water
  • Available in sizes 2 1/2″ – 8″ (65-200mm)

Model 460A, 460B

  • Cast iron body
  • Maximum pressure:
    • 250 psig (17.3 bar) for steam
    • 500 psig (35 bar) for water
  • Available in sizes 2 1⁄2″ – 8″ (65-200mm)

ESP-Systemwize

Ready to select pumps as well as suction diffusers, triple duty valves, heat exchangers, air/dirt separators, PIC valves, and parts? Click below to open the new Bell & Gossett ESP-Systemwize selection tool and enter your duty points to begin selecting the most energy efficient system:

ESP-Systemwize

Sizing Tools:

Steam + Water Pressure Reducing Values

Software Tool and Application Support/Suggest Enhancements

Please click the button below to report issues and suggest enhancements.

Support Request

System Selection and Technical Product Support

Consult your local Bell & Gossett Representative for additional assistance.